3.3.2 Stopping
•
Set the slowest engine speed with the throttle lever (d) (move it towards
the turtle icon) and let the engine run at low speed for 1-2 minutes to cool
it down a bit.
Turn the ignition off by setting the ignition switch (h) to the "OFF" position.
•
ATTENTION: in the event of a sudden stop of the machine, press the
emergency stop lever (F), but use this method only in emergencies!
IMPORTANT: never use the choke lever to stop the engine by throttling
it!
If the machine will not be used further, close the fuel supply valve - set the
•
lever (f) to the closed position.
3.3.3 Work
Top view:
• The marked "OK" box is a safe area for the operator working with the
machine. The arrows indicate the direction (area) of material processing
in the machine.
• Avoid standing directly in front of the hopper opening - risk of kickback.
Do not put your hands into the hopper!
• In the event of jamming the knives and a sudden blockage of the machine
mechanism, immediately turn off the engine, remove wedged branches
and other items that block the mechanism. After releasing the
mechanism, restart the machine and continue working.