5
Mounting
FORMATION OF CONDENSATE ON THE PRODUCT
•
Verify that the product can warm up to the ambient temperature before con-
necting the product to the power supply if you have previously stored or oper-
ated the product at lower temperatures.
Failure to follow these instructions can result in equipment damage.
5.1
Preparing mounting
Verify that the product is accessible and easy to oversee at all times.
Operate the product at power outlets at half room height.
Operate the product at power outlets which are easily reached by the cir-
culating room air.
Operate the product at power outlets which have a distance of at least
1.5 m away from doors, windows or other sources of ventilation.
Operate the product at power outlets in areas where dust or dirt cannot
pollute the product.
Fig. 3: Preparing mounting
Mounting
NOTICE
min. 1.5 m
CO
measuring instrument CM 10 / CM 10 E
2
EN
10