AMS VICAM--RADAR Bedienungsanleitung Seite 5

INSTALLING THE SENSOR
Take care when mounting the radar sensor as it is important to ensure the product operates correctly.
The sensor must be installed centrally on the rear of the vehicle at around 1 m (+/- 0.3 m) above ground level
and must be angled upwards by 5°. It can be horizontally angled with a silicone mounting support.
Important: Check the sensor's mounting position before beginning the installation on the vehicle. Temporarily
attach the sensor to the intended mounting position, switch the system on and ensure that nothing is detected.
NB: If the camera or sensor cables are too short or happen to become disconnected on vehicles with trailers, you can use our
range of CR or CSP extension cables. For more information, contact us.
OBJECT DETECTION MODEL
Detection distance (m)
Individual Vehicle
AMS Diffusion - Rue des Galeries - ZA du Chevalement - 59286 Roost Warendin - FRANCE - Tél. +33 (0)3.27.94.44.44 - Fax. +33 (0)3 27 94 44 45
Email : contact@ams-diffusion.fr - www.ams-diffusion.com RCS DOUAI A 451 360 382 - CODE APE 4531Z - SIRET 451 360 382 00035 - TVA FR 55 451 360 382
2. INSTALLATION
Lorry
Detection distance (m)
5