Filling Of The Rinse Aid Container - Wolkenstein SDW12-7SI Bedienungsanleitung

1. Remove the lower dish-rack and the lid of the water softener container.
2. When you fill the container for the first time, pour approx. 500 ml water into
the container.
3. Put the equipped funnel in the opening and pour approx. 2 kg water softener
(=dishwasher salt) in the container.
4. Close the lid carefully.
5. The control light for the hardness of water usually goes off after 2-6 days.

4.3 Filling of the rinse aid container

1 Full
3 50 %
5 Empty
 When the rinse aid indicator is not on, the colour of the display device "D"
indicates the needed quantity of rinse aid.
 Dark spot = container filled to capacity.
 The smaller the spot the emptier the container. The container should be filled
not less than 25%.
2 75 %
4 25 %; refill!
D Display device
Rinse aid container
47