Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Maintain a minimum clearance of 10 cm from any wall of the unit. Always keep the
unit out of reach of children and persons with reduced mental, sensory or
intellectual functions. Place the unit in such a way that the mains plug can be
reached at any time. Ensure that the power supply to the unit corresponds to that
specified on the identification plate!
ASSEMBLY OF THE UNIT
MSW-IPD-2000-2W (see the assembly drawing below)
The supplied unit is divided into 3 segments that need to be assembled together -
the base, the column and the cassette.
First, assemble the 4 wheels to the base, where the wheels with a brake should be
at the rear (closer to the column) of the unit.
Then mount the column to the base by placing it on the base and screwing them
together with screws. On the column, mount the cassette support arm, and then
the actuator that supports the operation of the cassette arm. In the end, on the
bracket mount the cassette by tightening it with screws.
Finally, connect the power cable of the cassette with the column - the socket is
located on the back of the cassette housing (see the above picture).
Number
Name
Werbung
