Residual Risks; Operating Condition And Work Surrounding; Hand Welding With Electrode (Mma) - Holzmann EISA162 Originalbetriebsanleitung

Do not wear loose clothing, long hair openly or loose jewellery like
necklaces etc. when operating the machine
They might be catched by rotating parts and cause serious injuries.
Use proper safety clothing and devices when operating the machine
(safety goggles, ear protectors, safety shoes ...)! Do not wear safety
gloves for operating because they decrease the working accuracy and
they might be pulled into the saw blade.
Before any maintenance you have to disconnect the panel saw from the
power source. Never use the plugged cable for transporting or manipu-
lating the machine.
On the device there are only few of them serviceable components. It is not necessary to
dismantle the machine. Have repairs carried out only by an expert!
Accessories: Only use of HOLZMANN Accessories!
Operation Instructions
11.5

Residual risks

Also in compliance with all safety regulations and when used properly, the following residual risks
must be observed:
 Risk of injury by tipping the machine
 Risk of injury to the eye by flying debris, even with goggles.
 risk by releasing chemical particles in the material to be processed, which are carcinogenic or
otherwise harmful to health.
These risks can be reduced if all safety rules are applied, the machine is properly maintained and
serviced the machine as intended and is serviced by a trained service professional. Despite all the
safety devices and keep your home healthy mind and your corresponding technical suitability /
training on the operation of a machine like the DIPA40 or DIPA100 the most important safety
factor
11.6

Operating condition and work surrounding

Operating condition: Reliable grounding protection
Voltage of power source: single phase, AC 230V±10%
Frequency: 50/60 Hz
11.7

Hand welding with electrode (MMA)

Selecting empiric formula: I=40*d ,d is dia. of the electrode.
Notice positive and negative connection during welding.
HOLZMANN Maschinen Austria  www.holzmann-maschinen.at
Elektroden Inverter Schweissanlage / electrode inverter welding unit
SAFETY GUIDELINES
Seite 15
EISA162 / EISA200