Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2
Specifications
2.1
Technical specifications
Specifications of the meter PCE-CT 80
Specification
Measurement range
Accuracy
Resolution
Measurable materials
Min. radius of curvature
convex
Min. radius of curvature
concave
Min. measuring surface
Min. coating thickness
Probe mode
Measure mode
Calibration
Units
Data transfer
Memory
Statistic functions
Alarm
Operating time
Power supply
Display
Displayed information
Operating conditions
Storage conditions
Dimensions
Weight incl. probe
Description
Depending on sensor (see sensor chart)
Depending on sensor (see sensor chart)
0.1 µm (<100 µm)
1 µm (>100 µm)
Magnetic materials (iron, steel...)
Non-magnetic materials (paints, plastics, ceramics...)
5 mm
25 mm
Ø 17 mm
0.2 mm (magnetic materials)
0.05 mm (non-magnetic materials)
Automatic mode with material recognition (Fe + NFe)
Magnetic mode (Fe)
Eddy current (NFe)
Single measurement
Multi-point calibration (1 ... 4 points per group)
Zero-point calibration
µm / mm / mils
Data transfer via USB 2.0
One group of measurements (DIR mode) that is lost when meter
is turned off
Four groups of measurements with auto save and max. 2000
readings (GEN mode)
Note: Each group of measurements has individual statistics,
alarm thresholds and calibration
Number of readings, mean value, minimum, maximum, standard
deviation
Indication when set upper and lower alarm thresholds are
exceeded or fallen below
Auto Power Off function
3 x 1.5 V AAA batteries
128 x 128 LCD
Battery level
Fault detection
0 °C... +50 °C
20 %... 90 % RH non-condensing
-10 °C... +60 °C
20 %... 90 % RH non-condensing
143 x 71 x 37 mm (L x W x H)
approx. 271 g
© PCE Instruments
15
Werbung
Inhaltsverzeichnis
