Start/Stop - Atag DW7213MA Gebrauchsanweisung

Using the dishwasher
NOTE!
For the best drying results, do not close the door before the drying phase has finished and the
machine has automatically switched off.
WARNING!
The dishwasher door must not be blocked or closed when opened automatically. Doing so may
damage the door lock mechanism. Wait at least 5 minutes before closing the door.
Delayed start
When you select Delayed start, the dishwasher will start 1-24 hours after you have pressed
closed the door.
1. Press
once to activate Delayed start. Press several times, or hold it in, to set the desired
number of hours.
2. Press
and close the door. The timer counts down and the dishwasher starts after the selected
delay.
If you want to cancel the Delayed start option, open the door then press and hold
seconds.

Start/Stop

Press until the display shows "Program started". This indicates that the dishwasher is ready to
start. Close the door properly, otherwise the dishwasher will not start.
If the dishwasher is not started or the door is not closed within 2 minutes of the last time the control
panel was pressed, the machine switches off.
Stopping or changing a program
If you want to change program after starting the dishwasher, open the door then press and hold
for three seconds. Add more detergent if the lid of the detergent dispenser has opened. Then select
a new program, press
Remaining time
Once you have selected a program, program mode and options, the time the program took when
last used is displayed.
18
and close the door.
and
for three