LaserLiner Greenline-Laser 1 Pro Bedienungsanleitung Seite 11

Green laser technology
Unlike red lasers, green laser light can only be indirectly generated. Because
of the system, therefore, fluctuations may occur:
• Different levels of line brightness between one device and another.
• The optimum operating temperature is 20°C. Outside of the working
temperature range of 0-40°C, green lasers become darker.
TIP: Before switching on the device, wait until it has had time to adjust to
the ambient temperature.
These fluctuations are excluded from claims.
Charging the accu
• Before using the Greenline-Laser 1 Pro,
fully charge the accu.
• Open the battery compartment (4),
insert the accu and connect the plug
to the socket. The plug fits in the
socket in one position only. Reclose the
battery compartment.
• Connect the battery charger / mains
unit to a mains source and plug into
the socket (11). Please only use the
charger/mains unit supplied with the
device. If a different one is used, the warranty will become void.
• The device can also be operated with standard alkali batteries (4 x type
AA). Insert the batteries as shown by the installation symbols. Ensure the
polarity is correct.
• If the LED (7) blinks constantly, either the batteries must be exchanged or
the accu recharged.
Note: Do not expose batteries to excessive heat such as sunshine, fire, etc. Dry
batteries must not be recharged. Used batteries must not be disposed of as
household waste. Please take them to a collection point for used batteries or for
special waste. Ask your local authority for further details. Batteries with the
recycling symbol can also be returned to our dealerships or to our Technical
Service.
Greenline-Laser 1 Pro
ENGLISH 11