Sticking Button Protection; Before Calling For Assistance - Sharp YC-PC322A Bedienungsanleitung

STICKING BUTTON PROTECTION

In any state, if any button on the control panel is stuck for more than1 minute, the program stops working
immediately and the display shows "FAIL". The microwave will emit a bleep. If the button keeps sticking, bleep will
sound every one minute. After troubleshooting, press STOP/ECO button to return to standby mode.

BEFORE CALLING FOR ASSISTANCE

Before asking for service, please check each item below:
• Check to ensure that the oven is plugged in securely. If it is not, remove the plug from the outlet, wait 10 seconds,
and plug it in again securely.
• Check for a blown circuit fuse or a tripped main circuit breaker. If these seem to be operating properly, test the
outlet with another appliance.
• Check to ensure that the power and timer knobs are set correctly.
• Check to ensure that the door is securely closed engaging the door safety lock system. Otherwise, the microwave
energy will not ow into the oven
IF NONE OF THE ABOVE RECTIFIES THE SITUATION, THEN CONTACT A QUALIFIED TECHNICIAN. DO NOT TRY TO ADJUST
OR REPAIR THE OVEN YOURSELF.
EN – 27 EN – 27
EN