Electromagnetic Fields (Emf); Preparing For Use; Installing The Charger; English - Philips FC6146 Bedienungsanleitung

experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person
responsible for their safety.
- Children should be supervised to ensure that they do not play with
the appliance.
Caution
- Remove the adapter from the wall socket before you clean the
charger.
- Only charge the vacuum cleaner with the charger supplied. During
charging, the adapter feels warm to the touch. This is normal.
- Always switch off the vacuum cleaner after use.
- The voltage on the contact strips in the charger is low (max. 12 volts)
and therefore not dangerous.
- Never block the exhaust air openings during vacuuming.
- Switch off the appliance when you recharge it.
- Always use the vacuum cleaner with the filter unit assembled.
- To avoid the risk of electric shock, be careful when you drill holes in
the wall to attach the charger, especially close to a wall socket.
- Charge, store and use the appliance at a temperature between 5°C
and 35°C.
- Do not dismantle or short-circuit the batteries. Protect the batteries
from fire, heat and direct sunlight.

Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding
electromagnetic fields (EMF). If handled properly and according to the
instructions in this user manual, the appliance is safe to use based on
scientific evidence available today.

preparing for use

installing the charger

1 Attach the charger to the wall as shown in the figure (Fig. 2).
If you attach the charger to the wall, the space between the screw holes
has to be 12cm.

English

7