Axis P3364-LVE Installationshandbuch Seite 24

AXIS P3364-LVE Network Camera
1 Black shield
2. Make sure the rubber gasket sits securely on the dome cover.
3. Clean the dome with a dry soft cloth to remove dust and finger prints and use a blower
to remove dust from the lens.
4. Attach the dome cover to the unit casing by tightening the four screws.
5. When the dome cover is in place, make sure that the camera is properly focused.
1
1
Unit casing
2
Dome cover
3
Screw and washer
The installation is now complete.
1
24