Using The Emergency Switch; Switching Off The Cooler - Waeco CoolFreeze CDF11 Bedienungsanleitung

Operation
I
NOTE
When the cooler is supplied by the starter battery, select the bat-
tery monitor mode "HIGH". If the cooler is connected to a supply
battery, the battery monitor mode "LOW" will suffice.
If you wish to operate the cooler from the AC mains, set the bat-
tery monitor to the "LOW" position.
6.10

Using the emergency switch

The device is equipped with an emergency switch. Thus you can keep cool-
ing if an error occurs within the interior electronics.
I
NOTE
During normal operation the emergency switch (fig. 1 12,
page 3) has to be set to the "Normal" position.
➤ If the interior electronics fail: Slide the emergency switch to the "Emergen-
cy" position.
6.11

Switching off the cooler

➤ Empty the cooler.
➤ Switch the cooler off: Press the "ON/OFF" button (fig. 2 1, page 3) for
three seconds.
➤ Pull out the connection cable.
If you do not want to use the cooler for a longer period of time:
➤ Leave the cover slightly open. This prevents odour build-up.
32
CoolFreeze CDF11
EN