Maintenance And Cleaning - Bosch GST Professional 1400 CE Originalbetriebsanleitung

OBJ_BUCH-1857-003.book Page 13 Monday, January 25, 2016 6:48 PM
Action
Connecting the dust extraction
Adjusting the Cutting Angle
Mounting the metal overshoe
Mounting the splinter guard
Orbital Action Settings
Adjusting the stroke rate
preselection
Switching On and Off
Guide the power tool toward the
workpiece only when switched on
Lubrication when cutting metal
Plunge Cutting
Selecting Accessories

Maintenance and Cleaning

 For safe and proper working, always keep the machine
and the ventilation slots as well as the tool holder
clean.
If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.
Bosch Power Tools
Figure Please observe
4
5
6
7
8
9
10
11
12
13
–
Clean the saw blade holder regularly. For this, remove the saw
blade from the machine and lightly tap out the machine on a
level surface.
Regularly spray penetrating oil onto the saw blade holder (see
figure 15, page 195).
Check the guide roller regularly. If worn, it must be replaced
through an authorised Bosch after-sales service agent.
Lubricate the guide roller occasionally with a drop of oil (see
figure 16, page 195).
English | 13
Page
188–189
189–190
190
191
191
192
192–193
193
194
194
196–197
1 609 92A 2BU | (25.1.16)