BRAND Transferpette S-8 Gebrauchsanleitung Seite 63

Removing pistons for cleaning or replacement
b.
c.
d.
Transferpette® S-8/-12 997208
a. Separate the pipetting unit from the
b. Rotate both closures of the pipette
c. Remove both outer Phillips-head
Z
The central guide axis (Z) must not be re-
moved!
d. Pull apart and separate the piston
hand grip.
housing cover by 90° (e.g. using a
coin) and pull off the pipette housing.
screws on the shaft unit.
NOTICE
and shaft unit. Remove stroke
springs.
Operating manual
63