Adjusting The Weight - Titanwolf 305360 Bedienungsanleitung

3) Specified cycle times" - Repeats the macro as often as specified.
When "Delay between buttons" is enabled, the intervals between button presses
are recorded. It is also possible to record individual in order to edit the recorded
steps afterwards by choosing Right-click on the corresponding button in the Mac-
ro Manager. After creating the macro, press "Confirm". Your macro is created now
and can be assigned to any mouse button. Save the configuration of the mouse by
pressing the "Apply" button.
Note: Please remember the "Z" and "Y" are reversed. To configure, use the letter
other than the one desired to obtain the right result. Also there is a limit of 60
characters max. per macro. It is only possible to delete a stored macro if this has
not been assigned to a mouse button.
6. Interchanging the buttons
You have the option of customising the side buttons as desired. For this purpose,
a slider is located at the bottom of the mouse, which unlocks the side buttons.
These can be subsequently removed. Once the slider is in the unlocked position,
the buttons can no longer be held.
Other side buttons and dummy caps are included in the box. Customise the side
keys as desired. Please note that you may have to change your keyboard layout to
accommodate the new button. The pressure point of the buttons is indicated by a
small plastic projection on the retainer of the button.
17
English