Product Safety - Beko BHCB91622BXH Bedienungsanleitung

facturer, the manufacturer's
service centre or a similar
qualified person.
• If the cable is damaged, con-
tact our nearest service centre
and have a new one installed.
• If your product has plug, do not
make electrical connections by
disconnecting the plug during
installation. Connections made
by cutting off render the
product warranty void and
pose a danger to user safety.
• Do not install the mains cord
near the heaters. The cable
might melt, causing a fire.
• If your product does not have a
cable, only use the connecting
cable described in the "Tech-
nical specifications" section.
• Any work on electrical equip-
ment and systems should only
be carried out by authorised
and qualified persons.
• In case of any damage, switch
off the product and disconnect
it from the mains. To do this,
turn off the fuse at home.
• Make sure that fuse rating is
compatible with the product.
• Never wash the appliance by
spraying or pouring water on it!
There is the risk of electric
shock!
1.3
• Height between the bottom
surface of your hood and the
top surface of the oven should
be no less than 650 mm.
• Do not touch the lamps of your
hood after operating the hood
for a long time. Hot lamps may
burn your hand.
• Do not operate the appliance
without an oil entrapment fil-
ter. Do not remove the filters
while the appliance is operat-
ing.
• Do not create a high flame un-
der the product. Otherwise, the
oil in the oil trap filter may ig-
nite, causing a fire.
• Run the product after placing
the cooking pots, pans, etc. on
the ovens. Otherwise, rising
heat may deform some parts
of your product.
• Turn off the oven before taking
the cooking pots, pans, etc.
from the ovens.
• Do not keep easily flammable
materials under your hood.
• Do not expose the appliance to
open flame. It may cause the
oil accumulating in the filter to
catch fire. Do not operate the
appliance without a filter.
EN / 6

Product Safety