Kenwood KDC-BT665U Schnellstartanleitung Seite 15

Note for specifications
Bluetooth Frequency Range:
2.402 GHz — 2.480 GHz
Bluetooth RF Output Power (E.I.R.P.):
+4 dBm (MAX), Power Class 2
Speaker Impedance:
4 Ω — 8 Ω
Operating Voltage:
12 V DC car battery
Bluetooth®
• Depending on the Bluetooth version, operating system and the
firmware version of your mobile phone, Bluetooth features may not
work with this unit.
• Be sure to turn on the Bluetooth function of the device to make the
following operations.
• Signal conditions vary depending on the surroundings.
Connect the microphone
Connect the supplied microphone to the microphone input jack on the rear
panel.
Adjust the
microphone
angle
Pair and connect a Bluetooth device for the first time
1 Press B SRC to turn on the unit.
2
Search and select the name of your receiver ("KDC-BT665U") on the
Bluetooth device.
"PAIRING"
KNOB" appears on the display.
• For some Bluetooth devices, you may need to enter the Personal
3
Press the volume knob to start pairing.
"PAIRING OK" appears when pairing is completed.
Once pairing is completed, Bluetooth connection is established
automatically.
• "BT 1" and/or "BT 2" indicator on the display window lights up.
"
the connected device.
Answer a call
Press
• To adjust the phone volume [00] to [35], turn the volume knob.
• To end a call, press
Audio player via Bluetooth
Press B SRC repeatedly to select BT AUDIO.
1
2
Operate the audio player via Bluetooth to start playback.
To
Play back/pause
Secure using cord
Select group or folder
clamps (not supplied)
if necessary.
Reverse skip/Forward skip
Reverse/Fast-forward
Repeat play
Random play
"PASS XXXXXX" "Device name"
Identification Number (PIN) code immediately after searching.
"indicator lights up to show the strength of the battery and signal of
or the volume knob or one of the number buttons (1 to 6).
.
On the faceplate
Press 6 IW.
Press 2
Press
Press and hold
Press 4
Press and hold 3
or [GROUP RANDOM].
"PRESS" "VOLUME
/ 1 .
.
.
repeatedly.
to select [ALL RANDOM]
7