Grundig M 1000 BT Bedienungsanleitung Seite 21

OVERVIEW
The hi-fi system controls
See the figure on page 3.
The front of the device
A
The hi-fi system displays.
8 Press briefly to switch the device
in and out of standby mode.
Press to activate CLOCK mode.
VOLUME
Adjusts the audio volume.
B
CD compartment.
USB port type A for connecting
a USB memory stick or an MP3
player.
AUDIO IN
Audio signal input (Audio In) for
connecting an external device.
In external data media mode:
starts and pauses playback.
In external data media mode:
7
ends playback.
In tuner mode: press and hold
down to start auto scan.
In tuner mode: press and hold
3
down to start the reverse fre
quency search; press briefly to
change the preset stations down.
In external data media mode:
reverse track selection;
press and hold down to search
for a certain passage back
wards.
In tuner mode: press and hold
4
down to start the forwards fre-
quency search;
press briefly to change the pre-
set stations up.
In external data media mode:
forward track selection, press
and hold down to search for a
certain passage forwards.
----------------------------------------------------------------------------------------------------------------------------------
Selects the input sources Tuner,
Bluetooth, AUDIO IN, Disc and
USB.
. Opens and closes the CD com-
partment.
The back of the device
SPEAKER
Terminals for connecting the
OUTPUT (4 �)
loudspeaker cables.
+ R– + L –
R = right channel, L = left
channel.
FM ANTENNA Antenna socket for the the
auxiliary antenna or the roof
antenna supplied.
AC ~
Socket for mains cable.
Note:
The only way to completely
7
disconnect the hi-fi system
from the mains supply is to
pull out the plug.
21
ENGLISH