HIKOKI NT 1850DA Bedienungsanleitung Seite 12

English
Battery
Lights ;
The battery remaining power is over 75%.
Lights ;
The battery remaining power is 50%–75%.
Lights ;
The battery remaining power is 25%–50%.
Lights ;
The battery remaining power is less than 25%.
Blinks ;
The battery remaining power is nearly empty.
Recharge the battery soonest possible.
Blinks ;
Output suspended due to high temperature.
Remove the battery from the tool and allow it to
fully cool down.
Blinks ;
Output suspended due to failure or malfunction.
The problem may be the battery so please
contact your dealer.
NAIL SELECTION
Only nails shown in the Table below can be driven with this Nailer.
Dimensions of nails
18 Gauge brad nails
(straight)
SPECIFICATIONS
1. Cordless Brad Nailer
Model
Motor
Applicable Nail
Applicable Nail Length
Nail Loading capacity [nails]
Firing mode
Cycle rate [nails/second]
Battery Model
Type
Voltage
Weight*
Dimension
Height × Length × Width
* Weight: According to EPTA-Procedure 01/2014
2. Battery Charger
Model
Charging voltage
Weight
NOTE
Due to HiKOKI's continuing program of research and
development, the specifi cations herein are subject to
change without prior notice.
Min.
1.9 mm
1 mm 1.25 mm
12
NT1850DA
DC Brushless
18 Ga
16 mm to 50 mm
100 (1 strip)
Single sequential / Contact
(Selectable)
2 (Intermittent)
BSL1820M
Li-ion battery
DC 18V
2.4–3.0 kg
286 mm × 267 mm × 92 mm
UC18YFSL
DC 14.4–18 V
0.5 kg
Max.