Samsung SWA-W700 Bedienungsanleitung Seite 10

6. Check if the LINK LED is solid blue (connection complete)
Front of the Wireless Subwoofer
7. If the SWA-W700 does not connect, take the necessary steps
according to the LED Indicator's status
Blue
Red
Others
Stops blinking.
Glows blue.
LED status
Connected with
On
the Soundbar
Connection
Blinking
standby status
On Connection failure
- Errors
ENG - 10
The LINK LED indicator stops blinking
and glows a solid blue when a
connection is established between the
Soundbar and the Wireless Subwoofer.
Action
-
Check if the Soundbar is turned on
Repeat steps 3 through 6.
Check if the Soundbar is turned on
1. Press the ID SET button on the
bottom of the Wireless Subwoofer
with a pen tip for 5~6 seconds until
the LINK LED indicator blinks (in
Blue).
ID SET LINK
2. Repeat steps 3 through 6.
Contact a Samsung Service Centre.
5 Sec