Mitsubishi Electric PEA-RP200 Bedienungshandbuch Seite 4

2. Parts Names
Display
The main display can be displayed in two different modes: "Full" and "Basic". The factory setting is "Full". To switch to the "Basic" mode, change the
setting on the Main display setting. (Refer to operation manual included with remote controller.)
<Full mode>
* All icons are displayed for explanation.
⑫ ⑬⑭ ⑮ ⑯
⑥
⑦
⑧
Room
⑨
⑩
Set temp.
Cool
①
⑪
Mode
㉒
▌ ① Operation mode
Indoor unit operation mode appears here.
▌ ② Preset temperature
Preset temperature appears here.
▌ ③ Clock (See the Installation Manual.)
Current time appears here.
▌ ④ Fan speed
Fan speed setting appears here.
▌ ⑤ Button function guide
Functions of the corresponding buttons appear here.
▌ ⑥
Appears when the ON/OFF operation is centrally controlled.
▌ ⑦
Appears when the operation mode is centrally controlled.
▌ ⑧
Appears when the preset temperature is centrally controlled.
▌ ⑨
Appears when the filter reset function is centrally controlled.
▌ ⑩
Indicates when filter needs maintenance.
▌ ⑪ Room temperature (See the Installation Manual.)
Current room temperature appears here.
▌ ⑫
Appears when the buttons are locked.
Most settings (except ON/OFF, mode, fan speed, temperature) can be made from the Menu screen.
(Refer to operation manual included with remote controller.)
4
⑱ ⑲
Fri
Temp. Fan
②
⑤
<Basic mode>
③
⑳
Cool
㉑
①
⑰
④
Mode
▌ ⑬
Appears when the On/Off timer, Night setback, or Auto-off timer
function is enabled.
appears when the timer is disabled by the centralized control
system.
▌ ⑭
Appears when the Weekly timer is enabled.
▌ ⑮
Appears while the units are operated in the energy-save mode. (Will
not appear on some models of indoor units)
▌ ⑯
Appears while the outdoor units are operated in the silent mode.
▌ ⑰
Appears when the built-in thermistor on the remote controller is
activated to monitor the room temperature (
appears when the thermistor on the indoor unit is activated to
monitor the room temperature.
▌ ⑱
Appears when the units are operated in the energy-save mode with 3D
i-see Sensor.
▌ ⑲
Indicates the vane setting.
▌ ⑳
Indicates the louver setting.
▌ ㉑
Indicates the ventilation setting.
▌ ㉒
Appears when the preset temperature range is restricted.
②
Fri
Set temp.
Temp. Fan
⑤
⑪ ).
③
④