Chauvet DJ COREpar Q120 ILS Schnellanleitung Seite 3

AC Power
This product has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.
Power Linking
It is possible to link up to 6 COREpar Q120 ILS products at 120 V and 10 products at 230 V. Do not exceed this number.
Power-linking cords can be purchased separately.
Fuse Replacement
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and replace with a fuse of the exact same
type and rating.
5. Re-insert the fuse holder and reconnect power.
Mounting
Before mounting this product, read the
Mounting Diagram
Mounting clamp
(such as CLP-15N from Chauvet)
Mounting bracket
Bracket adjustment knob
(x2)
Control Panel Description
Button Function
<MENU> Exits from the current menu or function
<UP> Navigates upwards through the menu list and increases the numeric value when in a function
<DOWN> Navigates downwards through the menu list and decreases the numeric value when in a function
<ENTER> Enables the currently displayed menu or sets the currently selected value into the selected function
COREpar Q120 ILS QRG Rev. 5
QUICK REFERENCE GUIDE
Safety Notes.
Safety cable
(such as CH-05 from Chauvet)
EN
2