Dab-Radio - OK. ORD 220 DAB+ Gebrauchsanweisung

DAB RADIO
3 Press MODE to select DAB mode.
When the radio is switched on for the first time, it will automatically
do a full scan of DAB/DAB+ stations. The list of stations is then
stored, eliminating the need for another full scan when the radio is
turned on next time.
When the scan is complete, the stations are stored in alphabetical
order. The first available station will be played back.
Note
If there is no DAB reception at any time, change the position of the
unit or adjust the antenna.
CHANGING DAB/DAB+ STATIONS
Press the buttons PRE- / PRE+ in DAB mode to navigate available DAB/
DAB+ stations.
DAB MODE-AUTO SCAN
Press the button MENU in DAB mode and then turn the SELECT/
TUNING control until. <Full scan> appears on the display. Press SELECT/
TUNING control to confirm.
The unit scans all available DAB/DAB+ stations and plays the first
available station. Alternative, you can activate the auto scan function by
long pressing SCAN/PRESET.
Note
• New stations and services are added to the stored DAB/DAB+ stations.
In order to make new DAB/DAB+ stations and services available on
your radio, run a full scan at regular intervals.
• Not all channels are available regionally everywhere. The number of
stations that can be received may vary from region to region. This is
partly due to the fact that the frequency network is not fully devel-
oped everywhere or that transmitters are only broadcast within a
region instead of in the entire country. The reception is reduced
indoors depending on the con-struction.
• For more details of all available/receiv-able stations in your country,
visit: https://www.worlddab.org/
IM_ORD220-DAB+_221024_V05_HR.indb 23 IM_ORD220-DAB+_221024_V05_HR.indb 23
23
EN
24/10/2022 5:46 PM 24/10/2022 5:46 PM