From Usb Connection; Usb Auto Play Feature; Cec - Panasonic TX-40MS490E Bedienungsanleitung

Picture Settings: Display the picture settings menu.
Sound Settings: Display the sound settings menu.
Sound Tracks: Set the soundtrack option if more then
one available.
Last Memory: Set to Time if you want to resume the
playback from the position where it was stopped next
time you open the same video file. If set to Off the
playback will start from the beginning. Highlight an
option and press OK to change the setting.
Seek: Jump to a specific time of the video file. Use
the numeric and directional buttons to enter the time
and press OK.
Subtitle Encoding: Display subtitle encoding options
if available.

From USB Connection

IMPORTANT! Back up the files on your USB storage devices
before connecting them to the TV. Manufacturer will not be
responsible for any file damage or data loss. Certain types
of USB devices (e.g. MP3 Players) or USB hard disk drives/
memory sticks may not be compatible with this TV. The TV
supports FAT32 disk formatting, NTFS is not supported. FAT32
formatted devices with a storage capacity larger than 2TB
are not supported. Files larger than 4 GB are not supported.
You can view your photos, text documents or play your
music and video files installed on a connected USB
storage device on the TV. Plug in the USB storage
device to one of the USB inputs on the TV.
On the main media player screen select the desired
media type. On the next screen, highlight a file name
from the list of available media files and press the OK
button. Follow the on-screen instructions for more
information on other available button functions.
Note: Wait a little while before each plugging and unplugging
as the player may still be reading files. Failure to do so may
cause physical damage to the USB player and the USB device
itself. Do not pull out your drive while playing a file.

USB Auto Play Feature

This feature is used to start playing the media content
installed on a removable device automatically. It uses
the Multi Media Player application. The media content
types have different priorities in order to be played. The
reducing priority order is as Photo, Video and Audio.
That means, if there is Photo content in content in the
root directory of the removable device, the Multi Media
Player will play the Photos in a sequence (in file name
order) instead of Video or Audio files. If not, it will be
checked for Video content and as last Audio.
You can enable the USB Auto Play feature from within
the Multi Media Player app. Launch the application on
the Home Screen and press the Yellow button on the
remote to enable or disable this feature. If the feature
is enabled while the USB device is already connected,
unplug the device and then plug it back in to activate
the feature.
This feature will only work if all of the following cir-
cumstances occur:
• The USB Auto Play feature is enabled
• The USB device is plugged in
• Playable content is installed on the USB device
If more than one USB device is connected to the TV,
the last one plugged in will be used as content source.

CEC

With CEC function of your TV you can operate a
connected device with the TV remote control. This
function uses HDMI CEC (Consumer Electronics
Control) to communicate with the connected devices.
Devices must support HDMI CEC and must be
connected with an HDMI connection.
In order to make use of the CEC functionality the
related option in the menu should be switched on.
To check, switch on or off the CEC function, do the
following:
• Enter the Settings>Device Preferences>Inputs
menu on the Home Screen or TV options>Settings>-
Device Preferences>Inputs menu in Live TV mode.
• Scroll down to Consumer Electronic Control
(CEC) section. Check if the HDMI control option
is switched on.
• Highlight the HDMI control option and press OK to
switch on or off.
Make sure that all CEC settings are properly set up
on the connected CEC device. The CEC functionality
has different names on different brands. CEC function
might not work with all devices. If you connect a device
with HDMI CEC support to your TV, the related HDMI
input source will be renamed with the connected
device's name.
To operate the connected CEC device, select the
related HDMI input source from the Inputs menu on
the Home Screen. Or press the Source button and
select the related HDMI input source from the list.
To terminate this operation and control the TV via
the remote again, press the Source button, which
will still be functional, on the remote and switch to
another source.
The TV remote is automatically able to control the
device once the connected HDMI source has been
selected. However not all buttons will be forwarded
to the device. Only devices that support CEC Remote
Control function will respond to the TV remote control.
The TV supports also ARC (Audio Return Channel)
feature. This feature is an audio link meant to replace
other cables between the TV and the audio system
(A/V receiver or speaker system). Connect the audio
system to the HDMI2 input on the TV to enable ARC
feature.
English - 28 -