English (Original Instructions); Technical Data - DeWalt XR DCS386 Bersetzung Der Originalanweisungen

EngLIsh
CORDLESS RECIPROCATING SABRE SAW
DCS386
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
Type
Battery type
No‑load speed
Stroke length
Cutting capacity in wood/metal profiles/plastic tubes
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to EN62841‑2‑11:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
While cutting board
Vibration emission value ah,
B
Uncertainty K =
While cutting wooden beam
Vibration emission value a
h,WB
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or is poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level over
the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
24
WALT one of the
e
V
DC
min
‑1
mm
mm 300/130/160
kg
dB(A)
dB(A)
dB(A)
= m/s 2
m/s
2
= m/s
2
m/s 2
EC-Declaration of Conformity
Machinery Directive
Reciprocating Sabre Saw
DCS386
DCS386
18
D WALT declares that these products described under
e
Technical Data are in compliance with: 2006/42/EC,
1
EN62841-1:2015+AC:2015, EN62841-2-11:2016+A1:2020.
Li‑Ion
These products also comply with Directive 2014/30/EU and
0–3000
2011/65/EU. For more information, please contact D
28.6
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
3.5
84
95
Markus Rompel
Vice-President Engineering, PTE-Europe
5
D WALT, Richard-Klinger-Straße 11,
e
65510, Idstein, Germany
20.07.2022
18
DECLARATION OF CONFORMITY
4.2
THE SUPPLY OF MACHINERY (SAFETY)
15
1.5
Reciprocating Sabre Saw
DCS386
D WALT declares that these products described under
e
Technical Data are in compliance with: The Supply of
Machinery (Safety) Regulations, 2008, S.I. 2008/1597
(as amended), EN62841-1:2015+AC:2015, EN62841-2-
11:2016+A1:2020.
These products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact D
address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
REGULATIONS 2008
WALT at the following
e
WALT at
e
WALT.
e
WALT.
e