Cloud Nine THE AIRSHOT Bedienungsanleitung Seite 6

INSTRUCTION FOR USE
READ ALL INSTRUCTIONS BEFORE USING
1. Plug into the mains and turn on by switching on the upper
switch.
2. Using the Upper switch select power required
O = OFF
I = Low Power
II = High Power
Using the Lower switch select the temperature
= Cold
I = Medium Temperature
II = High Temperature
3. The LED on the back of the handle will show blue when
Cold Temperature is selected or when the Cold Shot Button
is activated. It will show red when ( l ) Medium or ( ll ) High
Temperatures are selected.
4. To quickly blast dry hair, use without fixing a nozzle.
5. For precision drying, fix either the 60mm or 75mm nozzle.
6. Commence styling ensuring at all times the hair does not
come into contact with the Suction/air inlet filter which is
located at the back of your hairdryer.
7. After use, your hairdryer should be run on the cold setting
for 1 to 2 minutes. Unplug your hairdryer from the mains
electricity supply and allow to cool down completely before
storing in a safe place.
8. Your Cloud Nine Hairdryer is supplied with 1 x 60mm and 1 x
75mm precision drying nozzles.
9. To fix or remove the nozzle from the hairdryer, align the
black and white alignment markers and twist the nozzle to
lock in position.