Bosch GIC 12V-5-27 C Professional Originalbetriebsanleitung Seite 32

32 | English
Zooming In/Out of the Image in the Display
To set the magnification level of the display view, press the up button (7) or the down
button (10) until the required magnification level has been reached.
Main Menu
To access the <Main menu>, press the centre button (9).
Navigating in the menu
– To scroll through a menu: Press the up (7) or down (10) buttons.
– To switch to a submenu: Press the centre button (9) or the right-hand button (11).
– To confirm a selected menu option: Press the centre button (9).
– To switch a function with a virtual switch on or off
button (9), the right-hand button (11) or the left-hand button (8). This will also save
the setting.
– To return to the previous, higher-level menu: Briefly press the ON/OFF button (6).
– To exit the main menu and return to the camera display: Briefly press the ON/OFF
button (6).
Menu options
– <AutoUp>: Switch the function on or off.
The AutoUp function rotates the image so that the "top" is shown at the top of the dis-
play (see figure F).
Note: The function is limited if a mirror (29) is fitted and/or with a vertically aligned
camera cable (1).
– <Gallery>: This is where recorded photos and videos can be accessed.
You can select the required file based on its date using the down (10) or up (7) but-
tons.
Press the right-hand button (11) or the centre button (9) to see a preview of the se-
lected photo or video.
To open the selected file, press the centre button (9).
Note: If a micro-SD card (20) is inserted, only files saved on this micro-SD card are
displayed. To open photos from the internal storage, you must first remove the micro-
SD card (20).
– <Camera mode>: Choose between <Photo> and <Video> for recordings.
– <Display brightness>: Set the required brightness for the display.
– <Color>: Switch between the colour view and black/white view of the display.
– <Device settings>
1 609 92A 89L | (17.03.2023)
: Either press the centre
Bosch Power Tools