Preparing The Device For Operation - Kruger & Matz KM1089 Bedienungsanleitung

Owner's manual
Please note: below illustrations and descriptions concerning
Windows operating system are for reference only, and may vary
from actual software on your device!
INSTALLING MEMORY CARD
1. Open the card reader cover.
2. Slide the microSD card (with pins facing the screen), until it clicks.
3. To uninstall memory card, press it, then slide it out of the socket.
Caution: before ejecting a microSD card (or any USB storage) use the Safely
Remove Hardware option, located next to the clock.

PREPARING THE DEVICE FOR OPERATION:

a. Connect one end of the power adapter to the device and the other to power
mains outlet and charge the device fully.
b. Press the power switch for about 2-3 seconds to switch the device on.
c. Follow the instructions in the startup wizard to set up your device.
During the startup, the wizard prompts you to register for your Microsoft
account. If you do not yet have a Microsoft account, please set one up
here.
d. After completion of the startup, your device is configured. This may take several
minutes to complete. Do not turn the device off during this process!
NAVIGATION
There are few simple gestures you need to know about to operate this device.
Tap
UNLOCKING THE DISPLAY
Drag the lock screen upwards to unlock the screen.
If your device is password-protected, you must then enter the password.
Swipe
Drag
Pinch
11