Cleaning Air/ Water Heat Exchanger - Disassemble Unit Cover - Pfannenberg PWS 6052 Betriebsanleitung

GB
5.2

Cleaning air/ water heat exchanger - disassemble unit cover

Requirement
-
Air/water heat exchanger has been de-energized
Procedure
▪ Remove the fastening screws (1).
▪ Tilt the unit cover (2) forward.
 For units with display or operating unit: Disconnect the ground cable and connecting cables from the display or
operating unit (inside) (3).
▪ Pull off unit cover (2).

The unit cover is removed.
Operating manual PWS and PWI 6052 086100042a © Pfannenberg GmbH
1
1
Figure 16 – Unit cover removal
2
3
Page 25 / 31