Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
USE
EN 8
Saturation indicator
The relevant symbol will flash in the display to indicate the saturation of
the grease or carbon filter.
Grease filter indicator
•
Clean the grease filter when the 'Filter' cleaning symbol appears in
the display (see chapter 'Maintenance').
Carbon filter indicator
•
Replace the carbon filter when the 'carbon filter' cleaning symbol
appears in the display (see chapter 'Maintenance').
Resetting saturation indicators
•
Switch off the cooker hood using the On/Off button (1).
•
Depress the '-' button (4) for two seconds.
The saturation indicator has been reset. The symbol will disappear
from the display.
Setting the display for recirculation
Prior to use on a recirculation system set the display to 'recirculation'.
•
Switch off the cooker hood using the On/Off button (1). Ensure that
the cooker hood is connected to the power supply!
•
Depress '+' (6) for 2 seconds until the 'carbon filter' cleaning
symbol lights up twice in the display.
The display is now set for use on a recirculation system.
•
Press the '+' button (6) several times to return to the fan system
(the 'carbon filter' cleaning symbol will light up once in the display).
Werbung
Inhaltsverzeichnis
