Use; Operation - Atag WS90FM Serie Bedienungsanleitung

USE

Operation

Starting the exhaust system
1. Press the On/Off button.
The exhaust system starts at setting 2.
▷
The display shows the exhaust setting.
▷
2. Change the exhaust setting with the plus (+) or minus (-) buttons.
You can choose from three settings and an intensive mode.
▷
The intensive mode automatically switches back to setting 2 after 4 minutes.
▷
Stop the exhaust system
1. Press the On/Off button.
The exhaust system stops.
▷
Switching on lighting
1. Press the On/Off button for the lighting.
The light comes on at maximum intensity.
▷
2. Keep the lighting On/Off button pressed to dim the light intensity.
▷ The lighting is steplessly dimmable.
Starting the timer
1. Start the exhaust and choose an exhaust
2. Press on the plus (+) button until the exhaust setting flashes in the display.
The exhaust system stops automatically after 10 minutes and 2 audio signals sound.
▷
Stopping the timer
1. Press on the plus (+) button until you hear an audio signal.
The exhaust setting in the display stops flashing.
▷
The timer is stopped.
▷
Clean Air function
With the Clean Air function, the air in the kitchen is refreshed every hour. The Clean Air function
starts the exhaust for 5 minutes every hour at the set exhaust setting.
1. Switch off the cooker hood (if necessary).
2. Press the On/Off button and the plus (+) button at the same time.
3. Then press the plus (+) button several times to set an exhaust setting.
The display will show 1->2->3->1-> ...
▷
EN 6
setting.