Cleaning The Oven Lamp - Beko BBIM173001BE Bedienungsanleitung

3. As shown in the figure, gently lift the in-
nermost glass (1) towards "A" and then,
remove it by pulling towards "B".
1 Innermost glass
4. If your product has an inner glass (2), re-
peat the same process to detach it (2).
5. The first step of regrouping the door is
to reassemble the inner glass (2). Place
the bevelled edge of the glass to meet
the bevelled edge of the plastic slot. (If
your product has an inner glass). Inner
glass (2) must be attached to the plastic
slot closest to the innermost glass (1).
6. While reassembling the innermost glass
(1), pay attention to place the printed
side of the glass on the inner glass. It is
crucial to place the lower corners of the
innermost glass (1) to meet the lower
plastic slots.
7. Push the plastic component towards the
frame until a "click" sound is heard.

7.8 Cleaning the Oven Lamp

In the event that the glass door of the oven
lamp in the cooking area becomes dirty;
clean using dishwashing detergent, warm
2* Inner glass (it may
not be available for
your product)
EN / 35
water and a soft cloth or sponge and dry
with a dry cloth. In case of oven lamp fail-
ure, you can replace the oven lamp by fol-
lowing the sections that follow.
Replacing the oven lamp
General Warnings
• To avoid the risk of electric shock before
replacing the oven lamp, disconnect the
product and wait for the oven to cool. Hot
surfaces may cause burns!
• This oven is powered by an incandescent
lamp with less than 40 W, less than 60
mm in height, less than 30 mm in dia-
meter, or a halogen lamp with G9 sockets
with less than 60 W power. Lamps are
suitable for operation at temperatures
above 300 °C. Oven lamps are available
from Authorised Services or licensed
technicians. This product contains a G
energy class lamp.
• The position of the lamp may differ from
that is shown in the figure.
• The lamp used in this product is not suit-
able for use in the lighting of home
rooms. The purpose of this lamp is to
help the user see food products.
• The lamps used in this product must
withstand extreme physical conditions
such as temperatures above 50 °C.
If your oven has a round lamp,
1. Disconnect the product from the electri-
city.
2. Remove the glass cover by turning it
counter clockwise.
3. If your oven lamp is type (A) shown in
the figure below, rotate the oven lamp
as shown in the figure and replace it
EN
DE