SOUNDMASTER ELITELINE ICD2060 Bedienungsanleitung Seite 34

The first time you select DAB radio mode, or if the station list is
empty, ICD2060 automatically performs a full scan to see what
stations are available. You may also need to start a scan manually
to update the list of stations for one of the following reasons:
• Available stations change from time to time.
• If reception was not good for the original scan, this may
result in an empty or incomplete list of available stations.
• If you have poor reception of some stations (burbling), you
may wish to list only stations with good signal strength.
To start a scan manually, choose Full scan. To scan only stations with good signal strength,
select Local scan.
Once the scan is complete, the radio shows a list of available stations.
To remove stations that are listed but not unavailable, choose Prune invalid.
Press the "BACK" button to view a list of stations and press "OK" to select. Once selected, the
station plays and the screen shows information about station, track or show as broadcast.
•
Presets
To store an Internet radio preset, press and hold the "PROGRAM" on Remote Control until the
display shows the "Save preset" screen. Select one of the 40 presets to save the current station
and press "OK" to confirm. Or press 0 to 9 on the Remote Control to store the current playing
station into the preset directly.
To select a preset, press briefly the "PRESET" button on the unit or "PROGRAM" on Remote
Control , then select one of the listed preset stations and press "OK" to confirm. Or press 0 to 9
on the Remote Control to directly recall the presets.
Now playing information
While the stream is playing, the screen shows its name and DLS (Dynamic Label Segment)
information broadcast by the station giving real-time information such as program name, track
title and contact details. Stereo broadcasts are indicated with an icon at the bottom of the
screen. To view further information, press "INFO" button on the radio.
Each time you press "INFO" button on the radio, another set of information is displayed, cycling
through DLS text, program type, ensemble name/frequency, signal strength/error rate, bite
rate/codec/channels and today's date.
ICD2060 / English Instruction Manual
12