Error Codes - Wolkenstein WGSP14-6DW Bedienungsanleitung

9.1 Error codes

E
RROR CODE
E 1
E 3
E 4
E
RROR CODE
E d
E c
If overflow occurs, turn off the main water supply before calling a service.
If there is water in the base pan because of an overfill or small leak, remove
the water before restarting the dishwasher.
M
EANING
Long water inlet time.
Required temperature
is not reached.
Leakage / overflow /
overfilled.
M
EANING
Communication error
between main board
and display board.
Control system failed.
~
144
P
OSSIBLE CAUSES
 Tap is closed.
 Water intake is restricted.
 Water pressure is too low.
 Malfunction of the heating
element.
 Please contact the aftersales
service.
 Too much inlet water.
 An element of the appliance
leaks.
 Please contact the aftersales
service.
P
OSSIBLE CAUSES
 Short circuit / cable breakage.
 Please contact the aftersales
service.
 PCB (printed circuit board) or
motor failure.
 Please contact the aftersales
service.
~