Switch-Over Weighing Unit - KERN FCB-Serie Betriebsanleitung

9.5.1

Switch-over weighing unit

As per standard the change-over button
between the weighing units by shortly pressing.
Enable unit:
Switch over unit:
26
is set so that is it possible to switch-over
The unit for quick selection can be determined when
the -button is shortly pressed for the first time.
 Press the
button and wait until the display
flashes.
 Use the navigation keys  to select the weighing
unit and confirm on ➔ button.

Using button, it is possible to switch over
between the enabled unit 1 and unit 2.
TFCB-A-BA-def-2312