ecofort ecoQ DryAir 20L Complete Gebrauchsanweisung Seite 90

Troubleshooting
The dehumidifier will not
turn on
The humidity is not
decreasing
Unusual noises
Buttons don't work
Water in tank overflows
Error code
88 | Instruction Manual ecoQ DryAir 20L & 25L Complete
• The mains lead is not properly plugged in or there is
no power from the wall socket.
• The water tank is full or incorrectly fitted.
• The set humidity level has been reached.
• Power plug or cord damaged.
• The dehumidifier has not been used long enough.
• Make sure that the doors and windows are closed.
• The ambient temperature is too low.
• The ambient humidity level is lower than the humidity
set.
• The air filter frame is overly dirty.
• Exceeded recommended room capacity.
• The dehumidifier is tilted or standing on an uneven
surface.
• Make sure that the air filter is clean.
• Loose or foreign particles inside the unit.
• Sound of flowing refrigerant.
• Child Lock is activated, press timer button for 2
seconds, until child lock indicator disappears from
display.
• Water tank may be damaged.
• Float for water auto-sensor is not in place.
• Internal drainage passage is blocked or obstructed.
• Temperature sensor error. Contact customer care.
• Humidity sensor error. Contact customer care.