Intended Use; Safety Informations - BGS technic 8656 Bedienungsanleitung

Rim Lock Dismantling Tool Set | 10 pcs.
TOOL
1 Dismanting socket 18 mm, Länge 60 mm
2 Dismantling socket 19 mm, Länge 60 mm
3 Dismantling socket 20 mm, Länge 60 mm
4 Dismantling socket 21 mm, Länge 60 mm
5 Dismantling socket 22 mm, Länge 60 mm
6 Dismantling socket 23 mm, Länge 60 mm
7 Dismantling socket 24 mm, Länge 60 mm
8 Dismantling socket 25 mm, Länge 60 mm
9 Impact mandrel
10 Ejection mandrel
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.

INTENDED USE

This tool set allows professional removing of rim locks and "opened" almost all rim locks without
damaging the rims. The conical dismantling sockets allow high power transmission.

SAFETY INFORMATIONS

•
Keep children and other persons away from the working area.
•
Do not allow children to play with this tool or its packaging.
•
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
Always wear ANSI safety goggles and protective gloves when using the tool.
•
Roughen the socket with sandpaper before each use!
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 8656
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed