Timer Function - Cameo DURA SPOT Bedienungsanleitung

EDIT USER COLOR IN THE STAND ALONE MENU (Edit User Color)
In the menu item Edit User Color, you can save the brightness and a colour mixture of R, G, B and
W directly in the unit in four individual colour presets.
Select Stand Alone, confirm the selection, then select Edit User Color and confirm again. Select
the desired preset (Color 1 - Color 4) and confirm the selection. Now select the menu item you
wish to edit and confirm. Set the desired value from 000 to 255 and confirm again.

TIMER FUNCTION

The timer function enables time-controlled control of the stand-alone Direct LED, Colour Preset
and CCT modes in such a way that the fade-in time (Fade In) can be set from 0 to 60 minutes, the
dwell time (Dwell Time) from 0 to 24 hours and the fade-out time (Fade Out) from 0 to 60 minutes.
After activation of the timer function, the timer control will be implemented upon the next system
start.
Select Stand Alone, confirm the selection, then select Timer and confirm again. Select the set-
ting On under Timer and confirm. For the individual timer control settings, select Fade In, Dwell
Time or Fade Out and confirm. You can now set the respective value as desired. Confirm all
entries. To deactivate the timer function, select the setting Off under Timer and confirm the entry.
Note: The timer function is suitable for use in master/slave operation via cable.
18