Emptying The Bowl; Cleaning And Servicing; Cleaning Products; Overview Of Cleaning - Bosch VeggieLove MUZ5VL1 Gebrauchsanleitung

Tip: For optimum results, process
thin ingredients in bunches.
Prepare your food.
1.
Cut large items of food into pieces
so they fit into the filling shaft.
Insert mains plug.
2.
→ Fig. 11
Set the rotary switch to the recom-
3.
mended speed.
→ Fig.
12
Insert the food into the filling shaft
4.
and press down with the pusher,
applying light pressure.
→ Fig. 13
Stop processing when
5.
all food has been processed.
‒
the food in the bowl almost
‒
reaches the outlet opening of
the continuous feed shredder.
Set the rotary switch to
6.
→ Fig. 14
Wait until the appliance stops.
Unplug the mains plug.
7.
6.2 Emptying the bowl
Tip: You can empty the bowl during
processing without removing the con-
tinuous feed shredder.
Set the rotary switch to
1.
Wait until the appliance stops.
Unplug the mains plug.
2.
→ Fig.
15
Press the release button and raise
3.
the swivel arm until it engages.
→ Fig. 16
Remove and empty the bowl.
4.
→ Fig.
17
6.3 Removing the continuous
feed shredder
Rotate the continuous feed shred-
1.
der anticlockwise until it releases.
→ Fig.
18
Remove the continuous feed
2.
shredder from the base unit.
→ Fig.
6.4 Dismantling the continu-
Rotate the lid anticlockwise.
1.
→ Fig.
Markings
up.
Remove the lid.
2.
→ Fig.
Take hold of the disc holder by the
3.
shaft and take out of the housing
with the cutting disc.
→ Fig.
Take hold of the cutting disc by
4.
the edge and remove.
→ Fig.
⁠ .
Tip: Clean all parts immediately after
use so that residues do not dry on.
7 Cleaning and servicing
7.1 Cleaning products
Find out here what cleaning agents
are suitable for your accessories.
⁠ .
ATTENTION!
Using unsuitable cleaning agents or
incorrect cleaning may damage the
accessories.
▶
Do not use cleaning agents con-
taining alcohol or spirits.
▶
Do not use sharp, pointed or metal
objects.
▶
Do not use abrasive cloths or
cleaning agents.
7.2 Overview of cleaning
Clean the individual parts as indic-
ated in the table.
→ Fig.
Cleaning and servicing en
19
ous feed shredder
20
and
21
22
23
24
must match
19