Specifications - Yamaha RS300B Bedienungsanleitung

SPECIFICATIONS

AUDIO SECTION
• Minimum RMS output power
(8 Ω, 20 Hz to 20 kHz, 0.04% THD) ...................... 50 W + 50 W
• Dynamic power per channel (IHF)
(8/6/4/2 Ω) ........................................................... 70/77/89/100 W
• Maximum power per channel [Europe model only]
(1 kHz, 0.7% THD, 4 Ω) ...................................................... 55 W
• IEC power [Europe model only]
(1 kHz, 0.04% THD, 8 Ω) .................................................... 52 W
• Power band width
(0.06% THD, 25 W, 8 Ω) .................................... 10 Hz to 50 kHz
• Damping factor (SPEAKERS A)
1 kHz, 8 Ω .................................................................. 150 or more
• Maximum effective output power (JEITA)
[Asia and Central/South America models only]
(1 kHz, 10% THD, 8 Ω) ....................................................... 85 W
• Input sensitivity/Input impedance
PHONO (MM) ....................................................... 3.5 mV/47 kΩ
CD, etc. ................................................................. 200 mV/47 kΩ
• Maximum input signal
PHONO (MM) (1 kHz, 0.003% THD) ................. 60 mV or more
CD, etc. (1 kHz, 0.5% THD) ................................... 2.2 V or more
• Output level/Output impedance
CD, etc. (Input 1 kHz, 200 mV)
REC ................................................................... 200 mV/1.0 kΩ
CD, etc. (Input 1 kHz, 200 mV, 8 Ω)
PHONES ............................................................ 340 mV/470 Ω
• Frequency response
CD, etc. (20 Hz to 20 kHz) .......................................... 0 ± 0.5 dB
CD, etc., PURE DIRECT on (10 Hz to 100 kHz) ........ 0 ± 1.0 dB
• RIAA equalization deviation
PHONO (MM) ................................................................ ± 0.5 dB
• Total harmonic distortion
PHONO (MM) to REC
(20 Hz to 20 kHz, 3 V) ........................................... 0.025% or less
CD, etc. to SPEAKERS
(20 Hz to 20 kHz, 25 W, 8 Ω) ................................ 0.015% or less
• Signal to noise ratio (IHF-A network)
PHONO (MM) (5 mV input shorted) ..................... 87 dB or more
CD, etc., PURE DIRECT on
(200 mV input shorted) ........................................ 100 dB or more
• Residual noise (IHF-A network) ............................................ 30 µV
• Channel separation
CD, etc. (5.1 kΩ input shorted, 1/10 kHz) ........ 65/50 dB or more
• Tone control characteristics
BASS
Boost/Cut (50 Hz) ......................................................... ± 10 dB
Turnover Frequency ........................................................ 350 Hz
TREBLE
Boost/Cut (20 kHz) ....................................................... ± 10 dB
Turnover Frequency ....................................................... 3.5 kHz
• Continuous loudness control
Attenuation (1 kHz) ............................................................ –30 dB
• Gain tracking error (0 to –99 dB) ............................... 0.5 dB or less
FM SECTION
• Tuning range
[U.S.A. and Canada models] ........................... 87.5 to 107.9 MHz
[Asia and Central/South America models]
................................................. 87.5/87.50 to 107.9/108.00 MHz
[Europe, Russia and Australia models] ....... 87.50 to 108.00 MHz
• 50 dB quieting sensitivity (IHF, 1 kHz, 100% MOD.)
Mono ................................................................ 3.0 µV (20.8 dBf)
• Signal to noise ratio (IHF)
Mono/Stereo .............................................................. 74 dB/70 dB
38
En
SPECIFICATIONS
• Harmonic distortion (1 kHz)
Mono/Stereo ................................................................ 0.3%/0.3%
AM SECTION
• Tuning range
[U.S.A. and Canada models] .............................. 530 to 1710 kHz
[Asia and Central/South America models]
.......................................................... 530/531 to 1710/1611 kHz
[Europe, Russia and Australia models] .............. 531 to 1611 kHz
GENERAL
• Power supply
[U.S.A. and Canada models] ............................. AC 120 V, 60 Hz
[Central/South America models]
.............................................. AC 110-120/220-240 V, 50/60 Hz
[Australia model] ............................................... AC 240 V, 50 Hz
[Europe and Russia model] ............................... AC 230 V, 50 Hz
[Asia model] .......................................... AC 220-240 V, 50/60 Hz
• Power consumption ............................................................... 150 W
• Standby power consumption ........................................ 0.5 W or less
• YID-W10 standby power consumption
(YID-W10 connect) .................................................. 1.2 W or less
• iPod charge power consumption ................................... 30 W or less
• Maximum power consumption
[Central/South America models only]
(8 Ω , 1 kHz, 10% THD) .................................................... 280 W
• Dimensions (W × H × D) ............................... 435 × 151 × 387 mm
• Weight .................................................................... 8.8 kg (19.4 lbs)
* Specifications are subject to change without notice.
(17-1/8" × 6" × 15-1/4")