Answering Machine
Recording/Deleting Memos
A memo is a message left for other machine users and can be played in
the same way as an incoming message. Only one memo can be recorded
at a specific time.
Recording a memo
A memo cannot be longer than 2 minutes.
2 sec M
ð, S
Playing back the memo
M
Deleting the memo
M
D
Playing/Deleting recorded messages
Playing the messages
If a memo has been recorded, it is played before any of the recorded
messages. The recorded messages are played back in the sequence they
were recorded.
2 sec S
S
S
A
B
Deleting one message
S
D
Delete all messages / memos
All the messages / memos are deleted. New messages / memos are re-
tained.
2 sec D
D
82
65
Activate the recording function
Speak your memo and confirm it
Play the memo
Play the memo
Delete the memo
66
Play the new messages
Play all the messages
Stop playback
Replay the message
Skip to the next message
Play the message to be deleted
Delete the message
Start the deleting process
Delete all messages / memos
Remote access
67
You can call your answering machine from another telephone to play
messages or execute other functions. A condition is that you use a tele-
phone which implements tone dialling.
PIN code for remote access
In order to use the remote access function, you must enter the relevant
PIN code. The default security code set at the factory is 000".
This setting is completed on the handset!
V
K or L
SETTINGS , V
K or L
, V
DTAM
K or L
, V
RA PIN CODE
ë, V
ë, V
ë, V
Starting remote access
ë
*, ë
If the code entry is incorrect, the OGM is repeated. If the security
code is entered incorrectly three times, the line is automatically
disconnected.
You can now execute other functions; . Key function assignment table.
Open the menu
Select the submenu and confirm
Select the submenu and confirm
Select the function and confirm
Enter the old PIN
Enter the new PIN
Enter the new PIN again
Dial your own phone number
Press the button during the outgoing
message and enter the security code