Inputting Your Personal Id; Presetting And Naming Input Signals - Sony KV-28FQ75 B Bedienungsanleitung

420556354(GB) Pages 16+.fm Page 20 Tuesday, May 22, 2001 8:53 AM
Using the TV menu system:

Inputting your personal ID

With this feature, you can allocate a safety code to your TV which will enable you to be traced if the TV is stolen and
recovered. The safety code however can only be entered once - please make a note of it!
1. Press the MENU button on the remote control to display the menu on the TV screen.
2. Press the V button to select the
Up' menu
3. Press the V button to select 'Manual Set Up' on the menu screen then press B to enter the
'Manual Set Up' menu.
4. Press the V button to select 'Personal ID' on the menu screen then press B to enter the
'Personal ID' sub menu.
5. Press the v or V buttons to select the first of a total of 11 characters (letter, number + or a
blank) then press B to go to the next character.
6. Repeat step 5 to input all the characters for the code.
7. Press the OK button to store. A status box appears on screen requesting you to re-enter your
code.
8. Press the OK button to store the code or press b to cancel.
9. Press the MENU button to remove the menu from the TV screen.

Presetting and naming input signals

Using this feature you can label input sources.
1. Press the MENU button on the remote control to display the menu on the TV screen.
2. Press the V button to select the
Up' menu
3. Press the V button to select 'AV Preset' on the menu screen then press B to enter the 'AV
Preset' menu.
4. Press the v or V buttons to select the desired AV input (AV1, 2, 3 or 4)..
5. Press the B button to select 'Auto Format' then press the v or V buttons to select 'Off',
'Normal' or 'Full'.
6. Press the B button to select 'Label'.
7. Press the v or V buttons to select the first character of the name then press the B button to
move to the next character.
8. Repeat step 7 to select the other 4 characters then store by pressing the OK button.
9. Repeat steps 4-8 for the other AV input sources then press the MENU button to remove the
menu from the TV screen.
20
symbol on the menu screen then press B to enter the 'Set
symbol on the menu screen then press B to enter the 'Set
Manual Set Up
Language/Country
Manual Programme Preset
Further Programme Preset
RGB Set Up
Picture Rotation
Personal ID - - - - - -
Demo
Select A-Z, 0-9: Store: OK
AV Preset
Input Auto Format Label
AV 1 Full AV 1
AV 2 Off AV 2
AV 3 Normal AV 3
AV 4 Normal AV 4
Select :
Enter:
AV Preset
Input Auto Format Label
AV 1 Off AV 1
AV 2 Normal AV 2
AV 3 Normal AV 3
AV 4 Full AV 4
Select :
Next : Confirm: OK