Controls; Appliance Controls - Amica FS140.3 Gebrauchsanweisung

CONTROLS

Appliance controls

The control panel is shown in figure 10. For reference it is also shown
below:
Key lock
Under the lock state, press "-" button for 3s, then operation buttons get
unlocked. And Parameter setting is enabled. In range between 2 C and
O
8 C refrigerator function is activate. In range between -12 C and -24 C
O O O
freezer function is activate.
Temperature changing
Unlock the panel, next press "Up" or "Down" to set the temperature. If
no button operation within 5 seconds after each setting, the current set
temperature shows on display will be fixed by the system automatically.
Then the display will stop flickering.
Super-Freezing function
Unlock the panel, next press the "+" button for 3 s, the temperature is
set to -32 C automatically. The flickering will stop in 5 seconds, then
O
Super-Freezing function starts.
After running 26 h, Super-Freezing function will stop automatically. The
indicator goes out. It reverts to previous state.
Under button unlock state during Super-Freezing mode, press the"+"
button, Super-Freezing function will stop. The indicator goes out. It re-
verts to previous state.
- 38 -