Philips PerfectCare Compact Essential GC6804/26 Bedienungsanleitung Seite 9

Problem
The iron leaves a shine
or an imprint on the
garment.
The ironing board cover
becomes wet, or there
are water droplets on the
floor/garment.
Possible cause
The surface to be ironed was
uneven, for instance because
you were ironing over a seam or
a fold in the garment.
There was not enough felt in
the ironing board cover.
Steam has condensed on the
ironing board cover after a long
ironing session.
You have an ironing board
that is not designed to cope
with the high steam rate of the
appliance.
Solution
PerfectCare is safe on all garments. The
shine or imprint is not permanent and will
come off if you wash the garment.Avoid
ironing over seams or folds or you can
place a cotton cloth over the area to be
ironed to avoid imprints.
Put an extra layer of felt material under the
ironing board cover.
Replace the ironing board cover if the
foam or felt material has worn out. You
can also add an extra layer of felt material
under the ironing board cover to prevent
condensation on the ironing board.
Put an extra layer of felt material under
the ironing board cover to prevent
condensation on the ironing board.
English
11