Electrical Connection - Franke FCBU 1204 C Bedienungsanleitung Und Installation

• Connect the hood to the mains through a two-pole switch having a contact gap of at least 3
mm..
• Before carrying out any operation the Hood must
be disconnected by removing the plug from the
power socket or turning off the main switch.
• From the inside of the hood canopy connect up the
power supply cable.
• Open the terminal box by unfastening the screws
on cover (A), connect the power supply to the
wiring in the box and then close the cover again.
• Fix the Charcoal Filter on the Metal grease filters
like as indicated in picture.
EN

ELECTRICAL CONNECTION

1
10