Operation; Electrical Connection - Franke CR 86 M F Serie Installations- Und Gebrauchsanweisung

CL 85 M / CM 85 M / CR 86 M _/F / SM 86 M _/F / SMP 86 M_/F

OPERATION

This oven combines the advantages of "static"
natural convection ovens with those of modern
"fan" ovens. It is a very versatile appliance
which enables safe and easy selection
of 6 different cooking methods. Use knobs
(A) and (D) on the control panel to select
the required programmes and temperature.
For best use of your Franke oven, consult
the cooking table on page 14.
Cooling fan
In order to reduce the temperature at the door,
control panel and sides, the Franke oven
is equipped with a cooling fan which
is automatically activated when the oven
is hot. When the fan is on, air blows from
the front of the oven between the front panel
and oven door; special attention has paid
to ensure that the exiting air does not disturb
the kitchen environment and that noise is kept
to a minimum.
To protect kitchen units, the fan keeps
running after cooking until the oven has
cooled down sufficiently.
Oven light
This symbol corresponds to switching
on of the oven light without activation
of any type of heating. This option is useful
for cleaning the oven when it is switched off,
to see the cooking compartment.
Defrosting
To defrost the food, the following procedure
is recommended:
X X
Set the programme selector knob (A)
to the position „TURBO GRILL COOKING".
X X
Set the thermostat knob (D) to 0°C.

Electrical connection

Franke ovens are supplied with a three-pole
power cable with free terminals. If the oven
is permanently connected to the power supply,
install a device that ensures disconnection
from the power supply, with a contact opening
distance (at least 3 mm) enabling complete
disconnection in category III overvoltage
conditions. Make sure:
9 The plug and socket are suitable for a 16 A
current.
9 Both can be easily reached and are
positioned so that no live part is accessible
when inserting or removing the plug.
9 The plug can be easily inserted.
9 The oven does not rest against the plug
when installed in the cabinet.
9 The terminals of two appliances
are not connected to the same plug.
9 A 3 x 1.5 mm² cable type H05VV-F is used
when replacing the power cable.
9 Make sure you observe the polarities
of the free terminals.
BLUE
YELLOW-GREEN
BROWN
L
Note:
Make sure the characteristics of the household
electrical system (voltage, maximum power
and current) are compatible with those of your
Franke oven.
The mains frequency is established
at switching on.
– 9 –
Brown = Live
Blue = Neutral
Yellow/Green = Earth
N
EN