Inhaltsverzeichnis
Werbung
ENGLISH
INSTRUCTIONS FOR CUTTING HAIR
•
To turn the product On or Off slide the switch. To locate the On/Off switch please refer
to the key features section.
•
For even cutting, allow the comb attachment/blade to cut its way through the hair. Do
not force it through quickly. If you are cutting for the first time, start with the maximum
comb attachment.
STEP 1 – Nape of the neck
•
Set the comb to 3mm or 6mm.
•
Hold the clipper with the blade teeth pointing upwards. Begin starting at the centre of
the head at the base of the neck.
•
Slowly lift the clipper, working upwards and outwards through the hair, trimming just a
little at a time.
STEP 2 – Back of the head
•
With the comb set at 12mm or 18mm, cut the hair at the back of the head.
STEP 3 – Side of the head
•
With the comb set at 3mm or 6mm, trim sideburns. Then change to the longer 9mm
guide comb and continue to cut the top of the head.
STEP 4 – Top of the head
•
Use the longer length comb attachment and set it to 24mm or 27mm then cut hair on
top of the head against the direction in which the hair normally grows.
•
For longer hair on top, use the longer length comb attachment (24 – 44mm) to achieve
the desired style.
•
Always work from the back of the head.
STEP 5 – The finishing touches
•
Use the clipper without an attachment comb for close trimming around the base and
sides of the neck.
•
To produce a clean straight line at the sideburns, reverse the hair clipper.
•
Place the reversed clipper at right angles to the head, tips of the blades lightly touching
the skin and then work downwards.
DUAL BOOST SYSTEM (HC7151)
•
There is a 3 position switch on HC7151 only. First position is Off, second is normal speed,
and 3 position is Boost for extra power to cut through thicker hair.
•
If the clipper is set to On, it will run at regular power.
•
If the clipper is set to Boost, it will provide maximum power.
CARE FOR YOUR HAIRCLIPPER
•
Your clipper is fitted with high quality blades.
•
To ensure long lasting performance of your clipper, clean the blades and unit regularly.
•
Always keep the attachment guide comb on the trimmer blade.
6
Werbung
Inhaltsverzeichnis
