■ After each use, whenever the appliance is unsupervised, prior to
assembly, disassembly or cleaning and in the event of an error, it
must always be disconnected from the mains.
■ If the power is interrupted, the appliance remains switched on and
restarts when the power is restored.
W Risk of injury!
■ Before replacing accessories or additional parts which move during
operation, the appliance must be switched off and disconnected
from the power supply. After switching off, the drive continues
running for a short time. Wait until the drive has come to a
standstill.
■ While operating the appliance, never reach into the bowl or
filling shaft with your hands. Always use the pusher for adding
ingredients. Do not insert any objects (e.g. wooden spoon) into the
bowl or filling shaft.
■ Care should be taken when handling sharp cutting blades,
emptying the container and during cleaning. Clean with a brush.
■ Do not touch the sharp edges of the universal blade with bare
hands. When not in use, always store the universal blade in the
blade guard. Do not grasp the sharp blades or edges of the cutting
discs. Only take hold of the cutting discs by the plastic in the
middle.
■ Never reach into the attached blender jug. Do not remove/attach
the blender jug until the drive has stopped. Do not touch the
blender blades with bare hands.
W Risk of scalding!
When processing hot liquids, steam escapes through the funnel in the
lid. Add a maximum of 0.4 litres of hot or frothing liquid.
W Risk of suffocation!
Do not allow children to play with packaging material.
W Warning!
We recommend that the appliance is never switched on for longer
than is necessary to process ingredients. Do not operate at no-load.
Do not expose the blender jug to temperatures above 80°C.
W Important!
It is essential to clean the appliance thoroughly after each use or
after it has not been used for an extended period. X "Cleaning and
servicing" see page 27
Printed on 100% recycled paper
Important safety notices
en
23