Using The Heater; Stand-By Button; Operating Modes - Radialight ONSEN Bedienungsanleitung

6. Using the heater

STAND-BY BUTTON

Use the button to turn on or put the product in Stand-by. When the product is in Stand-by, two white dashes appear on
the display:
When the product is turned on, it activates in Automatic mode. The message "AU" is shown for 3 seconds on the display and,
after, the set temperature is shown:

OPERATING MODES

M
By pressing the button it is possible to select Automatic, Programmed or Frost free mode as described in paragraph 5:
Press the
grammed mode. The display shows "Pr".
The clock symbol and the icon relating to the opera-
ting mode set for the current time and day (comfort,
eco or antifreeze) also light up on the display.
Press the
frost free mode. The display shows "FF" for 3 se-
conds and then the expected temperature of 7.0 ° C
(not modifiable) and the antifreeze mode symbol also
lights up on the display.
Press the
mode and restart the cycle.
3"
M
key to switch from automatic to pro-
M
key to switch from programmed to
M
button again to return to automatic
25
3"